Master automotive airbrush kit (cars, motorcycles, helmets, bicycles, etc.) specially designed for artists with the following characteristics:
The kit includes:
Great precision for very detailed works. Airbrushes Iwata High Performance have solvent resistant teflon joints, window design airbrush and paint regulator, and the auxiliary trigger / guide lever holds the needle in one piece. Designed for artists who need extreme detailed control.
The Airbrush Iwata Hi Performance HP-CP: double action, gravity paint supply.
The box contains:
Airbrush Compressor Elite ES890C is suitable for the professional and occasional airbrush artist. It is powerful, compact, friendly and quiet.
AV Premium is a water-based airbrush paint, versatile and non-toxic, suitable for all surfaces, specially formulated for optimal adhesion on metals, fiberglass, polyethylene, lexan polycarbonate, slot and radio control.
The colors are ideal for painting helmets, motorcycle deposits, cars (tuning) etc.
In some of these surfaces we recommend for best results a polyurethane primer base (62601) . PREMIUM is very flexible and resistant, allowing prolonged outdoor exposure without losing the colors intensity.
PREMIUM colors have been formulated using micronized and permanent pigments, and a new acrylic-polyurethane hybrid resin. This formulation gives the paint excellent impact strength and cracking resistance, and allows direct exposure to the heat. PREMIUM colors remain unchanged to some fuel mixtures used in R/C (up to 35% nitro).
The viscosity of the colors is fluid and self-leveling, and are easy to apply. For use with airbrush, colors can be used directly from the bottle using a 0,3mm nozzle and needle. The metallic colors may require dilution, and for 0,2mm airbrushes it is recommended to use the diluent (62066). The recommended compressor adjustment is 30-60 psi (2-4 bar).
The range consists of 20 colors, 23 metallized and fluorescent, and 9 transparent “Candy”. All colors are excellent for detailled works and to cover large surfaces, and can be applied with brush or airbrush.
The range is complemented with 8 auxiliary products: transparent base, diluent, primer, varnishes and drying retarder. For supports that require special very resistant protection we recommend to use a urethane varnish (aerosol or airbrush).
3 high quality mini stencils: Alphabet Stencil, circles and sparks effects.
3 meter Elite Airbrush Hose MNG1818-3 with with two threaded female endings G1/8 that engages most airbrushes and compressors in our shop.
Quick connector and pressure regulator for airbrushes with 1/8 connections.
It includes a female connector with pressure regulator and a male connector. The male connector is threaded to the 1/8 hose, and the male connector to the airbrush air inlet. Connected by pressure, disconnected by pulling up the central part of the female connector body.
Advantages of the quick connector with regulator:
Five sticks to clean airbrushes in different sizes. You can clean the paint reservoir, the paint ducts and the head of the airbrush (shutter, nozzle and nozzle cap).
Mini filter that is placed between the airbrush and the Hose that retains moisture generated by the compressor condensation.
Support for two airbrushes with fastening clamp on the the table.
The Stencils are available in different thicknesses and transparence degrees depending on your needs. For example, the Stencils used for automotive custom or illustration are usually semi opaque white and its thickness is 190 microns. In the other hand the Stencils for makeup and tattoos are usually transparent and thinner.
All our Stencils can become self-adhesive using our temporal adhesive spray The adhesive is low tack and doesn’t leave any residue on the surface you are working on. Just one application is enough to use the Stencil several times. When the glue is not sticky enough you can clean the Stencil with solvent and spray another coat of adhesive on it.
You can order a stencil with your logo or design.
|Modelo||High Performance HP-CP|
|Índice de flexión||Gravedad|
|Tipo de Boquilla||Rosca|
|Regulador de Presión||No|
|Regulador de Pintura||Sí|
|Contenido Caja||manguera, soporte, filtro, baquetas, enchufe rápido, pintura y plantillas|
|Objetivo||Hacer detalles muy finos|
|Aire Aspirado L/Min||23|
|Presión Max. (bar)||4|
|Garantía compresor||24 meses|
No customer comments for the moment.