Advanced Makeup Airbrush Kit
Advanced Airbrush Kit specially designed for people with the following characteristics:
- They have experience in airbrushing
- They will make big works
The kit includes:
Airbrush Harder Evolution CRplus 0.4
The new Evolution CRplus has a triple layer of copper, nickel and chrome with High Gloss finish.
It has the far mildest trigger in the market allowing a great control. With 0.4 mm nozzle is perfect for makeup.
Long lasting joint that seals the needle, and PTFE joint (teflon) on the reservoir nut, to avoid any air and paint leakage - even using paints that contain solvent.
Presented in elegant case, contains::
- 1 Airbrush Harder Evolution CRplus, with 0.4 mm nozzle
- 2 ml interchangeable reservoir with cap
- Paint reservoir: 2 ml interchangeable reservoir with cap
- Nozzle: 0.4 mm
- Needle: 0.4 mm
- Finish: Triple layer, high gloss chrome finish
- Joints: teflon (solvent resistant)
- Joints: teflon (solvent resistant)
- Reservoir Type: Upper Gravity Reservoir
- Pre-adjustment handle and paint flow regulator
- Two teeth needle cap with easy access to needle cleaning (more precise work)
- Allows to spray thin lines like a hair, up to 3 cm strokes.
- 5 year warranty.
Airbrush Compressor Elite ES860C
Compressor Elite ES860C is ideal for the professional and occasional airbrush artist. It is powerful, compact, friendly and quiet.
- Maintenance-free, air piston compressor without oil.
- Moisture Filter.
- Built-in air pressure gauge.
- Low pressure air flow control valve.
- On / Off switch.
- Power: At 1/6 horsepower this compressor provides more air volume (CFM) and air pressure (PSI) than any airbrush requires.
- Portable: Lightweight and compact, handle for its easy transport and storage.
- Precise air adjustment: The diaphragm pressure with moisture filter regulator provides precise airflow adjustment, reduces pulsation, and ensures a clean, dry air.
- Automatic On / Off: It turns off when the air pressure reaches 4 bars (57 PSI). It goes on at 3 bars (43 PSI). The reduction of the operating time means less engine wear and it will reduce heat-related moisture, extending the life of the compressor.
- Air-On-Demand: Designed to work when your do it, produces all the air flow when required. Turns off automatically when you don't use it.
- Thermally protected: it automatically turns off if it´s overheated.
- Low Noise: only 47 db.
- Type: simple cylinder compressor
- Power: 1/6 cv
- Voltage: 220-230V / 50HZ
- Air control: pressure regulator with Moisture Filterd.
- Air distribution: 20-23 liters / min
- Auto Start / Stop: Stops at 4 bars (57 PSI), begins at 3 bar (43 PSI)
- Connections: 1/8 inches
- Dimensions: 25.5cm x 13.5cm x 22cm
- Weight: 4.5 Kg
- Power cord: 1.8 meters
- Certificate: CE
TEMPTU PRO Make Up Starter Kit
The TEMPTU PRO Make Up is made with a silicone and micronized pigments based high quality formula. It is water resistant and offers a high moisturizing power. Although it is designed to be used in airbrushing, it can be applied with a brush, sponge or fingertips.
The TEMPTU PRO Make Up is suitable for all skin types, especially sensitive skins.
- Specific Make Up to be applied by the airbrushing technique. However it also can be used as a conventional Make Up, applying it with sponge, finger or brush. Applied by airbrush the drying is faster, being fixed in 5 or 10 minutes. With a conventional application the drying is in 15 or 20 minutes, depending on the amount of applied product.
- It is an emulsion of water in silicone (W/S) with extremely low viscosity, allowing its use of any type of airbrush.
- High opacity when applied with airbrush.
- Parabens free
- Film-forming ingredients, forming a high moisture and friction resistant film over the Make Up.
- It can be removed with makeup oil remover.
- Shake before using.
7 colors 7.5ml:
- 2 Bases 004 and 005
- 2 Adjusters 029 and 057
- 1 Rouge 043
- 1 Gloss 053
- 1 Hi-def (shade) 027
With this kit you can get started in the airbrush Make Up without investing lots of money.
Stencil Social Make Up 001
Three S-or Duck- Stencils for social Make Up .
- Big size: 19,9 x 9,4 cm
- Medium size: 15 x 7,1 cm
- Small size: 10 x 4,7 cm
3 meter Elite Airbrush Hose MNG1818-3 with with two threaded female endings G1/8 that engages most airbrushes and compressors in our shop.
- High quality stencil. Our stencils have very accurately cut edges.
- Durable stencil. They can last almost for a lifetime.
- Flexible stencil. The stencils easily adapt to almost any surface.
- The stencils are very easy to clean. They can be cleaned or disinfected with any kind of cleaning product or solvent because it has a smooth and pore-less surface.
- Attractive and fun designs. You don’t have to be a great artist to achieve impressive results.
- Multiuse stencil. When you are using our Stencils you can apply paint using several techniques such as airbrush, brush or even paintsticks. To achieve a 3D effect you can use stencil paste.
- Multi-task Stencils For instance, the Stencils from our mini series category can be used for cake decoration or tattoos. Another example is that the stencils from our airbrushing category can be used for scrapbooking, bodypaint or cake’s backgrounds.
The Stencils are available in different thicknesses and transparence degrees depending on your needs. For example, the Stencils used for automotive custom or illustration are usually semi opaque white and its thickness is 190 microns. In the other hand the Stencils for makeup and tattoos are usually transparent and thinner.
All our Stencils can become self-adhesive using our temporal adhesive spray The adhesive is low tack and doesn’t leave any residue on the surface you are working on. Just one application is enough to use the Stencil several times. When the glue is not sticky enough you can clean the Stencil with solvent and spray another coat of adhesive on it.
You can order a stencil with your logo or design.