Master Modelling Airbrush Kit specially designed for artists with the following characteristics::
The kit includes::
With health benefit: the new Infinity CRplus has a triple layer of copper, nickel and chrome, with High Gloss finish. This transmits an impeccable elegance, and the benefit of reducing the risk of nickel allergy.
Long lasting joint that seals the needle, and PTFE joint (teflon) to avoid air or Paint leakage - even using paints that contain solvent.
It has the far mildest trigger in the market allowing a great control. With a 0.15 mm nozzle it is preferable to use with fine paints.
Presented in elegant case, contains:
Distance cover detail (included):
Detail of the flow regulator with Quick Fix system that memorizes the adjustment (included):
You can connect a valve to regulate the air pressure (not included):
This compressor provides a pressure of 8 bar and allow to work with two different airbrush nozzle sizes. The compressor is equipped with an air tank to allow supplying a constant air pressure. The compressor is very quiet, it produces a noise level of only 45 dB (equivalent to the sound of a refrigerator).
The compressor Elite ES1080 has an 1/8 output, moisture filter, manometer and a manometer pressure regulator.
NOTE: To start the compressor it has to be be taken into account that these compressors contain no oil when they leave the factory and during transport. Therefore, before using it for the first time you have to put his oil to prevent damage.
*Includes 2 oil bottles, and inlet oil filter, for a proper air circulation .
Model Air is a range of acrylic colors developed especially for airbrush. With extra-fine milled pigments and a new generation acrylic resin.
The formula of Model Air offers new qualities in a water based acrylic. Its strength, hardness and covering power is ideal for airbrushing.
The Model Air milled pigments provide the modeler technical security and a high finesse when applied in his models. The special Model Air finesse is also a special quality for application with brush for details in miniatures, washes, transparencies and applications in diluted layers..
Colors can be mixed together and can be diluted with water, Model Air Diluent , Model Air Varnish or alcohol, depending on the result that you want to get. In any case, we suggest a blend with Model Air Thinner to maintain color properties.
Model Air has an exceptional reponse on all supports. Extraordinary paint adhesion on resin, plastic, steel, and white metal. Once protected with varnish, (matt, satin or brillante) colors resist oils, varnish, pure turpentine and even a light alcohol wash.
Model Air friction resistancede is higher than that of any other acrylic water based color.
3 high quality mini stencils: Alphabet Stencil, circles and sparks effects.
3 meter Elite Airbrush Hose MNG1818-3 with with two threaded female endings G1/8 that engages most airbrushes and compressors in our shop.
Quick connector and pressure regulator for airbrushes with 1/8 connections.
It includes a female connector with pressure regulator and a male connector. The male connector is threaded to the 1/8 hose, and the male connector to the airbrush air inlet. Connected by pressure, disconnected by pulling up the central part of the female connector body.
Advantages of the quick connector with regulator:
Five sticks to clean airbrushes in different sizes. You can clean the paint reservoir, the paint ducts and the head of the airbrush (shutter, nozzle and nozzle cap).
Mini filter that is placed between the airbrush and the Hose that retains moisture generated by the compressor condensation.
Support for two airbrushes with fastening clamp on the the table.
The Stencils are available in different thicknesses and transparence degrees depending on your needs. For example, the Stencils used for automotive custom or illustration are usually semi opaque white and its thickness is 190 microns. In the other hand the Stencils for makeup and tattoos are usually transparent and thinner.
All our Stencils can become self-adhesive using our temporal adhesive spray The adhesive is low tack and doesn’t leave any residue on the surface you are working on. Just one application is enough to use the Stencil several times. When the glue is not sticky enough you can clean the Stencil with solvent and spray another coat of adhesive on it.
You can order a stencil with your logo or design.
|Marca||Harder & Steenbeck|
|Índice de flexión||Gravedad|
|Tipo de Boquilla||Flotante|
|Regulador de Presión||No|
|Regulador de Pintura||Sí|
|Contenido Caja||manguera, soporte, filtro, baquetas, enchufe rápido, pintura y plantillas|
|Aplicación||Modelismo y RC|
|Objetivo||Hacer detalles y fondear|
|Aire Aspirado L/Min||20|
|Presión Max. (bar)||8|
|Garantía compresor||12 meses|
No customer comments for the moment.